Request a quote

Built to hold.

Investment-cast 316L deck hardware.

Gear gets chosen on days like this.

Time
06:20
Wind
14 kn NNE
Heel
10°

Cockpit, 06:20

Deck hardware fails at the weld, the plating and the fastener.

Dawn seen from a cruising yacht cockpit, teak deck and open sea ahead
First light on deck. Built around the passage ahead.
Unpolished marine cleats on an investment casting tree at a workshop

Cast, not fabricated.

One piece of 316L, poured and machined. No welded seam to crack after a hard season.

Close detail of solid stainless steel beside a worn plated fitting

Passivated, never plated.

Nitric passivation to ASTM A967. Nothing bright to lift, so a scratch stays a scratch.

A polished mooring cleat on the teak side deck of a yacht, open water beyond

Serviceable at sea. One 4 mm hex key.

Where it goes on the boat.

Three ranges, shared bolt patterns and finishes. Marks are placed for a 45 ft cruising yacht.

Tell us what the boat needs.

Build a spec sheet, copy it, send it to your yard. Nothing is submitted from this page.

Concept showroom. No enquiry leaves this page.

Lead times

Stock finishes ship in 10 working days. Black anodised and bronze are made to order, 6–8 weeks.

Where to buy

Chandlery across the Med, the Solent and the US east coast. Yards and OEM buyers are quoted direct.

NERIS / Deck gear

Deck gear.

Sail control, mooring and deck access. Nine models, three finishes, one fastener standard.

One fastener standard

M8 and M10 throughout, metric PCDs published on every drawing. Backing plates are sized in the installation guide.

Three finishes

Mirror polish, bead blast and hard anodised black run across the whole catalogue, so a mixed deck still reads as one set.

Files before you buy

DXF and STEP for every model, so the yard can dry-fit in CAD before a hole is cut.

drawing.svg Plan and section, millimetres, with bolt circle

Sizes

Specification

Finishes

Fitting

Photography

Form, material and life on deck. AI-generated concept imagery.

Fits with